1 x Geuder Dissection Scissor
3 x Dumont Forceps
2 x Petri Dishes

Part No. 601450

Trabeculum straight scissor - 8cm long.

Part No. 601600

Dumostar #5, 11cm long and 0.1x0.06mm tips    high quality and matt finish.

Part No. 601750

90mm Glass Petri Dish coated with 5mm Sylgard. Used for fixation of the tissue during dissection.

Part No. 605000

Usable with myograph models: 310A, 410A, 510A & 610M.

Part No. 602060 (set of 2 jaws)

For the stainless steel mounting jaws

Part No. 608050 (12 screws & 1 screwdriver)

Used for performing experiments with field stimulation.

Usable with myograph model 310A, 410A, 510A and 610M.

Part No. 602070 (set of 2 jaws)

Part No. 602080 (set of 2 jaws & connecting cable - phone jacks / BNC)

Used for ring preparations with lumen >500µm. Usable for myograph model 610M and 700MO

Part No. 603000 (200µm pins)
Part No. 603010 (250µm pins)
Part No. 603020 (300µm pins)
Part No. 603030 (400µm pins)

Accomendates low working distance. Usable on myograph model 120CW

Part No. 602050 (set of 2 jaws)

40µm wire for mounting of ring preparations with lumen >100µm.

Part No. 809000 (appr. 1.500m per role)

25µm wire for mounting of ring preparations with lumen >60µm.

Part No. 814550 (appr. 25m per role)

Chamber cover with ports for draining, filling & oxygenation.

Part No. 601330

Chamber cover with ports for draining, filling & oxygenation.

Part No. 601340

Chamber cover with ports for draining, filling & oxygenation.

Part No. 601350

Used for performing experiments with field stimulation using mounting pins.

Usable with myograph model 610M and 700MO.

Part No. 601360

For sealing the transducer pin-hole in the myograph chambers - avoid fluid from entering the transducer housing.

Part No. 815000 (50g)

Fits the holes in the myograph chamber covers

Part No. 601800

Used for calibrating the force transducer. Consist of 2g weight, bridge and T-balance.

Usable for myograpgh models 310A, 410A and 510A

Part No. 601250 (Specify Model)

Used for calibrating the force transducer. Consist of 2g weight, bridge and T-balance.

Usable for myograpgh models 610M and 120CW

Part No. 601250 (Specify Model)

For Myograph model 310A

Range: +/- 200mN
Resolution: 0.01mN

Part No. 601720 (Specify Model)

For Myograph models 410A & 510A

Range: +/- 200mN
Resolution: 0.01mN

Part No. 601720 (Specify Model)

For Myograph model 610M

Range: +/- 200mN / 400mN / 800mN & 1600mN
Resolution: 0.01mN

Part No. 601720 (Specify Model)

For Myograph model 120CW

Range: +/- 200mN
Resolution: 0.01mN

Part No. 601720 (Specify Model)

3m shielded BNC to BNC

Part No. 601200

Electronic valve used for rapid suction/draining of the chamber.

Usable for myograpgh models 310A, 410A and 510A

Part No. 816000

Enables the built-in pH meter in the myograph interface.

Part No. 606000

4-channel combined pulse and train generator.

Part No. 601100

A 4-channel data acquisition system suitable for use with all wire myographs.

Part No. ML846

A powerfull 4-channel data acquisition system suitable for use with all wire myographs.

Part No. ML866

Avaliable in 8- and 16-channels systems

Normalization add-on to Chart Acquisition software. Enables the normalization procedure to be done using Chart. Requires Chart v. 5.3 or later.

Part No. MLS065